Materials
Five materials, chosen by working conditions. Temperature, media and hardness decide the material — not the other way around.
Silicone (Solid / HTV)
Solid silicone rubber (HTV) for gaskets, seals, grommets, boots and covers. Typically −60°C to about 230°C, with excellent weathering, ozone and UV resistance.
Typical properties →LSR — Liquid Silicone Rubber
Liquid silicone rubber, injection molded for precise, thin-wall and complex parts in consistent batches.
Typical properties →EPDM
EPDM rubber for weather seals, water-system seals and HVAC gaskets. Typically −50°C to about 150°C, with excellent weathering, ozone and steam resistance.
Typical properties →NBR (Nitrile)
Nitrile rubber for oil seals, O-rings and fuel-system parts. Typically −40°C to about 120°C, with good resistance to oils and fuels.
Typical properties →FKM (Fluoroelastomer)
Fluoroelastomer for fuel, chemical and high-temperature sealing. Typically −20°C to about 200°C, with strong resistance to fuels, oils, chemicals and heat.
Typical properties →Not Sure Which Material?
Tell us the temperature, the media and the job — we suggest the material and confirm it from the data sheet for your order.
Ask in an RFQ →All values on the material pages are typical ranges for the material family. Actual values depend on the compound and are confirmed from the material data sheet for your order. Material documentation is confirmed per order, not claimed in advance.